Need residential concrete patios in Orland Park?
Request a callback to talk through your project, or request an estimate. A local provider in our network follows up. No obligation.
No obligation
A concrete patio is a flat, hard outdoor space for chairs, a grill, and a table. It is one of the most common backyard projects. It is also easy to get wrong if you have never done it before.
Themomtographers Concrete is a referral service. We do not pour concrete. We connect homeowners in the Orland Park area with independent local providers who do. This page walks you through the options, the steps, and the questions to ask. Answer first. Then the reason. Then your next move.
Concrete is hard, flat, and lasts for years. It suits most yards in the Orland Park area. The key is the prep work under it and the plan before it. Plan, then pour.
Themomtographers Concrete does not do the work. We connect you with independent providers in our network who do.
Start early. Good providers book up when the weather is mild. Concrete also needs the right temperatures to cure well.
In our region, deep frost and hot, humid summers both shape the schedule. Spring flooding can delay site work too. Ask a provider what window makes sense for your yard.
Expect a few steps, in this order:
This is concrete flatwork. It looks simple. The work is in the base and the slope.
Build bigger than you think. Furniture takes more room than a sketch suggests.
Tape out the shape on the lawn. Set your chairs on it. Then adjust.
Think about sun, shade, and the view from the kitchen. Check where the gutters drain. Keep it clear of sump pump discharge lines and utility lines. A provider will check this too.
A patio must slope away from the house. Water that runs toward the wall is a problem. Many homes here have full basements and sump pumps, so this matters.
Providers often set a gentle slope, about a quarter inch per foot. Ask about it by name.
If your basement gets damp or you see cracks, stop. Have foundation repair experts look first. That is a different trade. A new slab should not hide an old problem.
The finish changes the look, the grip, and the price. Here are the usual choices.
This is the standard. It has light lines for grip. It costs the least of the common finishes and hides wear well.
Stamped concrete patios use patterns pressed into wet concrete. They can look like stone, brick, or wood. They cost more and need sealer upkeep.
Color can be mixed in or added on top. Exposed aggregate shows small stones in the surface. It grips well when wet.
Cold winters push moisture into small cracks. It expands and makes them bigger. Hail and hard storms can mark a surface that is not sealed.
Ask about air-entrained concrete. It is mixed to handle frost better. Ask about control joints, too. They guide where cracks form.
The quote is not the only thing to compare. Look at what is in it.
Providers in our network are independent. Ask each one for proof of license and insurance where your area requires it.
Ask before pouring. Not after.
Get the answers in writing. A clear provider will not mind.
Keep it off limits at first. Foot traffic usually waits a day or two. Heavy items wait longer. Your provider will give the dates.
Seal it when the provider advises. Sweep often. Rinse off spills. Use a plastic shovel in winter, and skip rock salt on a young slab. It can flake the surface.
Decide on a rough size and finish. Note any water problems. Then Request a callback to check provider availability, or send the request form. There is no obligation to hire anyone.
The provider marks the shape and sets the slope so rain runs away from your house.
Soil is dug out, gravel is packed down, and forms hold the shape of your patio.
Concrete is placed, leveled, and finished. Joints are cut to guide cracks.
The slab rests while it hardens. Many providers then add a sealer.
Prices vary by job, soil, access, and finish. These are typical U.S. ranges only. Ask each provider for a written quote that lists every item, so you can compare fairly.
| Item | Typical range | Notes |
|---|---|---|
| Standard broom-finish patio | $6 – $12 per sq ft | Most common choice |
| Stamped or patterned patio | $12 – $25 per sq ft | Needs resealing over time |
| Colored concrete | $8 – $15 per sq ft | Mixed in or applied on top |
| Exposed aggregate | $10 – $18 per sq ft | Good grip when wet |
| Excavation and gravel base | $1 – $4 per sq ft | Depends on soil and access |
| Sealer | $1 – $3 per sq ft | Reapplied every few years |
Tell us the rough size, finish, and location. Request a callback or use the request form.
A local provider reviews your yard, drainage, and access, then discusses options.
Check the base, finish, and sealer. Ask questions before you agree to anything.
You and the provider pick a date. Weather may move it, so stay flexible.
You get the short answer, then the reason, so you know what to ask.
Providers in our network are independent and work near you in your area.
Asking costs nothing and carries no obligation. You choose whether to hire anyone, and who.
No jargon. Each step is explained before a provider ever sets foot in your yard.
Request a callback to talk through your project, or request an estimate. A local provider in our network follows up. No obligation.
No obligationMost residential patios are about four inches thick, set on a packed gravel base. Heavier loads, like a hot tub, may need more. Ask the provider to put the thickness in writing.
Many providers say light foot traffic is fine after a day or two. Furniture and heavy items usually wait about a week. Full curing takes longer. Follow your provider's advice.
It can be. Stamped concrete patios look like stone or brick and cost more than plain concrete. They also need sealer upkeep. If looks matter to you, ask for a sample.
Request a callback to talk through your project, or request an estimate. A local provider in our network follows up. No obligation.
No obligation